Portable Combined Hardness
Portable Combined Hardness
Portable Combined Hardness Novotest t-ud3
The UCI hardness measuring method complies to ASTM A1038. The ultrasonic contact impedance (UCI) probe is purposed to be used for hardness measuring in the case of the testing area minimal thickness (from 1 mm), objects of complex surface shape, and for measuring surface hardened layers hardness.
This method is very fast and easy: place the probe on the tested object surface, press the probe with the required effort to the surface and save the hardness value, shown on the display of the device. Small size diamond indenter allows measuring hardness value of all items, which are thicker than 1 mm. The UCI method of hardness testing is the least destructive because the hardness tester NOVOTEST T-UD3 with UCI probe leaves much smaller prints (imprints) than the majority of bench hardness tester would. That’s why a portable hardness tester with UCI probe is the best choice.
Portable Combined Hardness Novotest T-U3
Built-in camera allows to take a picture of tested object and mark tested area with corresponding hardness value. User get the most reliable and intuitive method of logging of measurements.
Hardness tester has technical specifications that not inferior to the most eminent and expensive hardness tester of the world, with a much more extensive functionality!.
The ultrasonic contact impedance (UCI) probe is used for measuring the hardness of small items, objects with a thin wall, complex form, and to measure the hardness of surface hardened layers.
Portable Combined Hardness Novotest T-D3
Built-in camera allows to take a picture of tested object and mark tested area with corresponding hardness value. User get the most reliable and intuitive method of logging of measurements.
Hardness tester has technical specifications that not inferior to the most eminent and expensive hardness tester of the world, with a much more extensive functionality!.
The device works with dynamic (Leeb) probe. Dynamic (Leeb) probe is used for measuring the hardness of non-ferrous metals, cast iron, coarse-grained materials, massive products, etc.
Portable Combined Hardness Novotest T-UD2
The device works with both ultrasonic contact impedance (UCI) and dynamic (Leeb) probes. User get the benefits of two methods of measurement – it is the maximum that can be obtained from a portable hardness tester.
Dynamic (Leeb) probe is used for measuring the hardness of non-ferrous metals, cast iron, coarse-grained materials, massive products etc.
The ultrasonic contact impedance (UCI) probe is used for measuring the hardness of small items, objects with a thin wall, complex form, and to measure the hardness of surface hardened layers.
Portable Combined Hardness NOVOTEST T-U2
UCI Hardness Tester NOVOTEST T-U2 is designed for rapid non-destructive testing of hardness:
- Metals and alloys on standardized international scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV).
- Metals with distinctions in properties of steel (e.g., non-ferrous metals, alloys of iron andothers) and using five additional scales for calibration.
- Use of the scale of tensile strength (Rm) for determining the tensile strength of carbon steel products pearlitic by automatically converting from the scale of hardness Brinell (HB).
Portable Combined Hardness NOVOTEST T-D2
Leeb Hardness Tester NOVOTEST T-D2 is designed for rapid non-destructive testing of hardness:
- Metals and alloys on standardized hardness scales.
- Metals with different properties from steel (for example, non-ferrous metals, alloys, cast iron, etc.) with additional scales for calibration.
- Use of the scale of tensile strength (Rm) for determining the tensile strength of carbon steel products pearlitic by automatically converting from the scale of hardness Brinell (HB).
Portable hardness tester T-D2 very easy in operation, has the main functions with the lowest price in the world among the portable Leeb hardness testers!.
Contact us
Parque Empresarial TecnoCórdoba
C/.Islandia, nave 12 B · 14014 Córdoba (Córdoba)